รายละเอียดสินค้า
สถานที่กำเนิด: จีน
ชื่อแบรนด์: Vanka
ได้รับการรับรอง: ISO9001:2015,CE
เงื่อนไขการชําระเงินและการจัดส่ง
จำนวนสั่งซื้อขั้นต่ำ: 50 ชุด
ราคา: $5-$10 Sets
รายละเอียดการบรรจุ: 570x340x165
เวลาการส่งมอบ: 30 วันทำงาน
เงื่อนไขการชำระเงิน: L/C, T/T, Western Union, Moneygram
สามารถในการผลิต: Set/Set/Sets ต่อเดือน
พิมพ์: |
ท่ออพยพ, ชิ้นส่วนเครื่องทำน้ำร้อนพลังงานแสงอาทิตย์, แผ่นแบน, แรงดัน, อื่น ๆ |
วัสดุที่อยู่อาศัย: |
สแตนเลส, พลาสติก, ทองแดง, เหล็กสี, เหล็กชุบสังกะสี |
การติดตั้ง: |
อิสระติดผนังแทรกโดยตรง |
ประเภทการไหลเวียน: |
Direct / Open Loop (ใช้งาน), อื่น ๆ |
ประเภทการเชื่อมต่อ: |
Direct-plug, แยก, อื่น ๆ |
ความจุ: |
200,300,100 (L), 100L, 150 |
ความดัน: |
แรงดันปานกลางที่ไม่มีแรงดัน |
การใช้งาน: |
เครื่องทำน้ำอุ่น, ใช้บ้าน, ห้องน้ำ/ห้องครัว/อพาร์ทเมนต์/โรงพยาบาล/โรงเรียน/โรงงาน, ทั่วไป, คอนโทรลเล |
ระบบทำความร้อน: |
Thermosyphon (passive), batch / ics (passive) |
วัสดุ: |
เหล็กกล้าคาร์บอน, แก้ว borosilicate 3.3, ทองแดงสีแดง T2, พลาสติก, ABS |
สี: |
สีน้ำเงินสีเขียวตามที่คุณต้องการเงินดิบ |
การใช้งาน: |
ถังเก็บน้ำพลังงานแสงอาทิตย์และท่อสูญญากาศอุปกรณ์เสริมสำหรับเครื่องทำน้ำร้อนพลังงานแสงอาทิตย์รัฐบาลที |
ชื่อ: |
ตัวสะสมพลังงานแสงอาทิตย์แผ่นแบน, วาล์วน้ำค้างแข็ง, เครื่องทำน้ำร้อนพลังงานแสงอาทิตย์แบบไม่แรงดัน |
ชื่อผลิตภัณฑ์: |
อุปกรณ์เครื่องทำน้ำร้อนพลังงานแสงอาทิตย์คุณภาพสูงสำหรับเครื่องทำน้ำร้อนพลังงานแสงอาทิตย์คอนโทรลเลอร์ |
รายการ: |
คอนโทรลเลอร์เครื่องทำน้ำร้อนพลังงานแสงอาทิตย์ TK-7, เครื่องดูดฝุ่น Solar Collector, การขายร้อนอย่างม |
กรอบ: |
45 สแตนเลสสตีลสแตนเลส SUS201-1.2 มม./ เหล็กชุบสังกะสี -1.5 มม. โลหะผสมเหล็กอัลลอยหรือสแตนเลสหรือโลหะ |
การรับประกัน: |
5 ปีที่ทนทาน Solaris Solar Water Water, 5 ปี, 10 ปี, 10 ปีโดยไม่มีความเสียหายที่มนุษย์สร้างขึ้นและเห |
ถังภายใน: |
Sus304-2B สแตนเลสสตีลสแตนเลส SUS304-0.5 มม. |
หลอดสูญญากาศ: |
58 มม./1800 มม., QB-AL-N/AL-47-1500, ท่อสูญญากาศ 58*1800 หรือ 47*1500 |
พิมพ์: |
ท่ออพยพ, ชิ้นส่วนเครื่องทำน้ำร้อนพลังงานแสงอาทิตย์, แผ่นแบน, แรงดัน, อื่น ๆ |
วัสดุที่อยู่อาศัย: |
สแตนเลส, พลาสติก, ทองแดง, เหล็กสี, เหล็กชุบสังกะสี |
การติดตั้ง: |
อิสระติดผนังแทรกโดยตรง |
ประเภทการไหลเวียน: |
Direct / Open Loop (ใช้งาน), อื่น ๆ |
ประเภทการเชื่อมต่อ: |
Direct-plug, แยก, อื่น ๆ |
ความจุ: |
200,300,100 (L), 100L, 150 |
ความดัน: |
แรงดันปานกลางที่ไม่มีแรงดัน |
การใช้งาน: |
เครื่องทำน้ำอุ่น, ใช้บ้าน, ห้องน้ำ/ห้องครัว/อพาร์ทเมนต์/โรงพยาบาล/โรงเรียน/โรงงาน, ทั่วไป, คอนโทรลเล |
ระบบทำความร้อน: |
Thermosyphon (passive), batch / ics (passive) |
วัสดุ: |
เหล็กกล้าคาร์บอน, แก้ว borosilicate 3.3, ทองแดงสีแดง T2, พลาสติก, ABS |
สี: |
สีน้ำเงินสีเขียวตามที่คุณต้องการเงินดิบ |
การใช้งาน: |
ถังเก็บน้ำพลังงานแสงอาทิตย์และท่อสูญญากาศอุปกรณ์เสริมสำหรับเครื่องทำน้ำร้อนพลังงานแสงอาทิตย์รัฐบาลที |
ชื่อ: |
ตัวสะสมพลังงานแสงอาทิตย์แผ่นแบน, วาล์วน้ำค้างแข็ง, เครื่องทำน้ำร้อนพลังงานแสงอาทิตย์แบบไม่แรงดัน |
ชื่อผลิตภัณฑ์: |
อุปกรณ์เครื่องทำน้ำร้อนพลังงานแสงอาทิตย์คุณภาพสูงสำหรับเครื่องทำน้ำร้อนพลังงานแสงอาทิตย์คอนโทรลเลอร์ |
รายการ: |
คอนโทรลเลอร์เครื่องทำน้ำร้อนพลังงานแสงอาทิตย์ TK-7, เครื่องดูดฝุ่น Solar Collector, การขายร้อนอย่างม |
กรอบ: |
45 สแตนเลสสตีลสแตนเลส SUS201-1.2 มม./ เหล็กชุบสังกะสี -1.5 มม. โลหะผสมเหล็กอัลลอยหรือสแตนเลสหรือโลหะ |
การรับประกัน: |
5 ปีที่ทนทาน Solaris Solar Water Water, 5 ปี, 10 ปี, 10 ปีโดยไม่มีความเสียหายที่มนุษย์สร้างขึ้นและเห |
ถังภายใน: |
Sus304-2B สแตนเลสสตีลสแตนเลส SUS304-0.5 มม. |
หลอดสูญญากาศ: |
58 มม./1800 มม., QB-AL-N/AL-47-1500, ท่อสูญญากาศ 58*1800 หรือ 47*1500 |
High-energy 220V thermostatic pulse igniter designed for forced-exhaust gas water heaters. Features powerful pulse output and thermostat-compatible interface for fast, reliable ignition. Dual-pulse protection and multiple safety checks prolong service life and improve reliability. Easy to install and compatible with many forced-vent heater models.
Fast Ignition: High-energy pulse output ensures instant ignition with zero delay
Precise Control: Compatible with thermostat interface for accurate water temperature adjustment
High Success Rate: Dual pulse and dual safety ignition logic for more reliable ignition
Enhanced Safety: Multiple protections including flameout detection, over-voltage, and short-circuit protection
Easy Installation: Simple setup, compatible with various forced-exhaust gas water heaters
Item | Specification |
---|---|
Input Voltage | AC 220V ±10% |
Output Voltage | 12–15 kV (High-Voltage Pulse) |
Operating Frequency | 50/60 Hz |
Ignition Method | Pulse Ignition (Single/Dual Pulse Optional) |
Compatible Type | Forced-Exhaust Gas Water Heaters (Thermostatic/Standard) |
Protection Rating | IPX0 (Waterproof version optional) |
Operating Temperature | -10℃ ~ +60℃ |
Service Life (Typical) | ≥100,000 Ignitions (Depending on Use) |
Wiring | Input Wire, Ground, Thermostat Signal Wire, Ignition Output Wire |
Dimensions (Typical) | 60 x 41 x 29 mm (Example) |
Weight (Typical) | 100–120 g |
Q1: Which water heaters are compatible with this igniter?
A1: This module is specifically designed for forced-exhaust (fan-assisted) gas water heaters. It is compatible with most 220V-powered models that have thermostat/temperature control interfaces. For exact compatibility, please provide the wiring diagram or the heater model number.
Q2: Does installation require a technician?
A2: If you have basic electrical and gas appliance safety knowledge, you can replace the wiring according to the manual. If not, it is strongly recommended to have a professional technician perform the installation to ensure safety.
Q3: What should I do if ignition fails?
A3: First, check whether the power supply, grounding, and gas source are normal, and whether the spark electrode gap (recommended 8–12 mm) is correct. If the issue persists, replace the ignition module or contact after-sales support.
Q4: Is there a waterproof version available?
A4: Yes, some models are available with waterproof or moisture-resistant treatment. If the product will be exposed to humid environments, it is recommended to choose a waterproof version.
Q5: What is the warranty period?
A5: The standard warranty is 12 months (depending on supplier). Please note that non-original modifications or damage caused by human error are usually not covered under warranty.